Welcome Guest! To enable all features please Login or Register.
Options
Go to last post Go to first unread
fasasoftware@gmail.com  
#1 Posted : Thursday, December 05, 2019 11:39:27 AM(UTC)
fasasoftware@gmail.com

Rank: Advanced Member

Groups: BetaUser, Registered
Joined: 12/28/2015(UTC)
Posts: 31

Was thanked: 18 time(s) in 18 post(s)
Problem uploading final code to Arduino NAno...

Hi, when i start compilation with embrio 2.3.0.0 the final code is uploaded...but nothing happend... I have tryed the blink tutorial...
In my opinion...is that my arduino Nano need the old bootloader....in fact if i compile with the Arduino ide another program...it works!!....
Dear Admin, can you help me please??? best regards, LestrosoConfused Confused Confused
EmbrioAdmin  
#2 Posted : Thursday, December 05, 2019 11:54:15 AM(UTC)
EmbrioAdmin

Rank: Administration

Groups: Administrators
Joined: 12/11/2014(UTC)
Posts: 661

Thanks: 1 times
Was thanked: 109 time(s) in 104 post(s)
If it works when you use the Arduino IDE, use the "Use Arduino IDE Settings" checkbox in the connection tool bar. Before doing this, do an upload with the Arduino IDE, then close the Arduino IDE to save the settings. Now Embrio will use whatever settings you last used to do the upload instead of trying to specify. The only down side to this is the upload process is a little slower and you don't get the nice graphical feedback, but it's no big deal.

If you want to avoid using the "Use Arduino IDE Settings" checkbox, first I would suggest experimenting with the second drop down, it defaults to "unknown", but you might have better luck with one of the other two options.

If that doesn't work, look in the message log, and make sure you have the "debug" checkbox checked to show all messages. Are there any messages there when you do the failed upload?
fasasoftware@gmail.com  
#3 Posted : Friday, December 06, 2019 7:03:41 AM(UTC)
fasasoftware@gmail.com

Rank: Advanced Member

Groups: BetaUser, Registered
Joined: 12/28/2015(UTC)
Posts: 31

Was thanked: 18 time(s) in 18 post(s)
dear Admin, i have tryed all of your ideas...but here still don't working the final upload....Or better the final upload works with embrio2...but the micro do nothing..i have tryed the simple blink code....
i give you my screenshots in your mail ...for comodity....

Best regards, Lestroso
EmbrioAdmin  
#4 Posted : Friday, December 06, 2019 11:26:23 AM(UTC)
EmbrioAdmin

Rank: Administration

Groups: Administrators
Joined: 12/11/2014(UTC)
Posts: 661

Thanks: 1 times
Was thanked: 109 time(s) in 104 post(s)
In the screen shot I noticed that there was no Startup Trigger attached to the timer node to start the timer in its loop. Turns out this doesn't look like an upload issue after all.
fasasoftware@gmail.com  
#5 Posted : Saturday, December 07, 2019 2:26:47 AM(UTC)
fasasoftware@gmail.com

Rank: Advanced Member

Groups: BetaUser, Registered
Joined: 12/28/2015(UTC)
Posts: 31

Was thanked: 18 time(s) in 18 post(s)
Hi, Now it's all ok... it was my fault... your're right.. the problem is that i missed the start up trigger node...
Embrio software is good!!Merry Christmas!! Best regards, Lestroso.
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Notification

Icon
Error